Good old bunnings trident
- Keels
- Aussie Bonsai Fan
- Posts: 699
- Joined: December 11th, 2012, 12:13 pm
- Favorite Species: Pines, Eucalyptus and Callistemon
- Bonsai Age: 11
- Bonsai Club: CBS, Goulburn & VNBC
- Location: Canberra
- Has thanked: 223 times
- Been thanked: 257 times
Good old bunnings trident
Picked this thing up three years ago. Didnt know what to do with it or anything. I really forgot about it, then moved house so i just wacked it into the ground to fatten it up. Well i dug it out and could see the root flare really needed fixing. So i cut out the steel plate and nailed it to the bottom. I had to crack one of the bigger roots to really get it up to a more suitable angle instead of pointing down at a 45 degeee angle. Anyway this is how it looked in the end. It should fix the issues i think.
You do not have the required permissions to view the files attached to this post.
-
- Aussie Bonsai Fan
- Posts: 24
- Joined: September 19th, 2015, 8:47 pm
- Favorite Species: Natives
- Bonsai Age: 18
- Location: Canberra
- Has thanked: 60 times
- Been thanked: 3 times
Re: Good old bunnings trident
Looks good!
I haven't used metal for this, just tiles, will it corrode? and can that affect the tree?
Ta
TJ
I haven't used metal for this, just tiles, will it corrode? and can that affect the tree?
Ta
TJ
- Keels
- Aussie Bonsai Fan
- Posts: 699
- Joined: December 11th, 2012, 12:13 pm
- Favorite Species: Pines, Eucalyptus and Callistemon
- Bonsai Age: 11
- Bonsai Club: CBS, Goulburn & VNBC
- Location: Canberra
- Has thanked: 223 times
- Been thanked: 257 times
Re: Good old bunnings trident
I haven't had any issues. The sheet metal has a protective coating on it. Ive got others that have been in the ground for 12 months and i havent seen any issues yet. Hasnt started corroding.TimJ7 wrote:Looks good!
I haven't used metal for this, just tiles, will it corrode? and can that affect the tree?
Ta
TJ
- Keels
- Aussie Bonsai Fan
- Posts: 699
- Joined: December 11th, 2012, 12:13 pm
- Favorite Species: Pines, Eucalyptus and Callistemon
- Bonsai Age: 11
- Bonsai Club: CBS, Goulburn & VNBC
- Location: Canberra
- Has thanked: 223 times
- Been thanked: 257 times
Re: Good old bunnings trident
Last weekend i re-potted a couple of my trees I've been developing the root flare on. Thought i'd share this Trident again. The root flare is beginning to look much better now. Still a long way to go developing this little maple.
Couple people asked if the steel disc would rust and i am confident to say that after two years in the ground it hasn't rusted as all.
Couple people asked if the steel disc would rust and i am confident to say that after two years in the ground it hasn't rusted as all.
You do not have the required permissions to view the files attached to this post.
- MJL
- Aussie Bonsai Fan
- Posts: 2840
- Joined: October 26th, 2014, 8:47 pm
- Favorite Species: Maples, Elms, Cedars and Pines
- Bonsai Age: 7
- Bonsai Club: Waverley Bonsai Group & Yarra Valley Bonsai Society
- Location: Melbourne
- Has thanked: 424 times
- Been thanked: 643 times
Re: Good old bunnings trident
Cool little tree in development Keels.
I reckon when CBS opens up again (perhaps it already has ) there might be a little intermediate workshop run by your good self. I haven't used this technique but I suppose that advantage of using the metal is that someone could create a slightly concave shape if they want a softer flare.
(PS - given the importance of nebari - I am ashamed to say that it is a skill I have not advanced much. The only thing I tend to do is untangle and spread roots at repotting time... there are so many more advanced techniques that I should use.)
I reckon when CBS opens up again (perhaps it already has ) there might be a little intermediate workshop run by your good self. I haven't used this technique but I suppose that advantage of using the metal is that someone could create a slightly concave shape if they want a softer flare.
(PS - given the importance of nebari - I am ashamed to say that it is a skill I have not advanced much. The only thing I tend to do is untangle and spread roots at repotting time... there are so many more advanced techniques that I should use.)
Tending bonsai teaches me patience.
- Ryceman3
- Aussie Bonsai Fan
- Posts: 2617
- Joined: October 19th, 2014, 10:39 am
- Favorite Species: Pines & Mels
- Bonsai Age: 7
- Location: Melbourne
- Has thanked: 1067 times
- Been thanked: 1600 times
Re: Good old bunnings trident
Those roots are showing good ramification/progression in the two years since your first post Keels. A nice and even spread, gotta be happy with that.
"NO CUTS, NO GLORY"
https://www.instagram.com/r3_bonsai/
https://www.instagram.com/r3_bonsai/
- Keels
- Aussie Bonsai Fan
- Posts: 699
- Joined: December 11th, 2012, 12:13 pm
- Favorite Species: Pines, Eucalyptus and Callistemon
- Bonsai Age: 11
- Bonsai Club: CBS, Goulburn & VNBC
- Location: Canberra
- Has thanked: 223 times
- Been thanked: 257 times
Re: Good old bunnings trident
Thanks MarkMJL wrote: ↑July 19th, 2020, 2:37 pm Cool little tree in development Keels.
I reckon when CBS opens up again (perhaps it already has ) there might be a little intermediate workshop run by your good self. I haven't used this technique but I suppose that advantage of using the metal is that someone could create a slightly concave shape if they want a softer flare.
(PS - given the importance of nebari - I am ashamed to say that it is a skill I have not advanced much. The only thing I tend to do is untangle and spread roots at repotting time... there are so many more advanced techniques that I should use.)
CBS opens up next month. Really looking forward to catching when they open.
I've never heard of anyone wanting a softer flare but i imagine that the flare softens with time.
Nebari is important but don't be fooled of my latest posts. I've been really lazy with my little pines when it comes to the root system.
- Keels
- Aussie Bonsai Fan
- Posts: 699
- Joined: December 11th, 2012, 12:13 pm
- Favorite Species: Pines, Eucalyptus and Callistemon
- Bonsai Age: 11
- Bonsai Club: CBS, Goulburn & VNBC
- Location: Canberra
- Has thanked: 223 times
- Been thanked: 257 times
Re: Good old bunnings trident
It's come up better then i had hoped. Look forward to the next 2 years
- Alexa
- Aussie Bonsai Fan
- Posts: 38
- Joined: October 6th, 2019, 5:31 pm
- Favorite Species: All that work
- Bonsai Age: 0
- Location: Canberra
- Has thanked: 4 times
- Been thanked: 1 time
Re: Good old bunnings trident
LOL.. I've been Scoping bunnings for potential stock...
I just returned after decades in Qld.. What happened to all the nurseries?
Is CBS still doing its show this yr? ( I know - Who knows)
I just returned after decades in Qld.. What happened to all the nurseries?
Is CBS still doing its show this yr? ( I know - Who knows)
The Photons did it!
- MJL
- Aussie Bonsai Fan
- Posts: 2840
- Joined: October 26th, 2014, 8:47 pm
- Favorite Species: Maples, Elms, Cedars and Pines
- Bonsai Age: 7
- Bonsai Club: Waverley Bonsai Group & Yarra Valley Bonsai Society
- Location: Melbourne
- Has thanked: 424 times
- Been thanked: 643 times
Re: Good old bunnings trident
Sorry Keels, crap description- ‘softer flare’ - this diagram might explain what I was getting at. Both work.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Tending bonsai teaches me patience.
- Keels
- Aussie Bonsai Fan
- Posts: 699
- Joined: December 11th, 2012, 12:13 pm
- Favorite Species: Pines, Eucalyptus and Callistemon
- Bonsai Age: 11
- Bonsai Club: CBS, Goulburn & VNBC
- Location: Canberra
- Has thanked: 223 times
- Been thanked: 257 times
Re: Good old bunnings trident
Nur i wouldn't got too rapped up into soft flare or hard flare i reckon it'll soften with time as i develop the trident.
Is that something you've read before?
- MJL
- Aussie Bonsai Fan
- Posts: 2840
- Joined: October 26th, 2014, 8:47 pm
- Favorite Species: Maples, Elms, Cedars and Pines
- Bonsai Age: 7
- Bonsai Club: Waverley Bonsai Group & Yarra Valley Bonsai Society
- Location: Melbourne
- Has thanked: 424 times
- Been thanked: 643 times
Re: Good old bunnings trident
Yeah on this forum somewhere but for the life of me I can’t remember where ... and rest assured I’m not saying do it - your tree is looking fine - it was more just an idea that popped into my head because I thought the metal might be shapeable and I thought some folk might be interested.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Tending bonsai teaches me patience.
-
- Aussie Bonsai Fan
- Posts: 3940
- Joined: July 6th, 2009, 8:17 am
- Favorite Species: Plum
- Bonsai Age: 0
- Bonsai Club: Goulburn Bonsai Society
- Location: Goulburn
- Has thanked: 513 times
- Been thanked: 1096 times
Re: Good old bunnings trident
Looking good. You could become Shibui's apprentice?
Just taking the P, but it does look like its well on the way.
Just taking the P, but it does look like its well on the way.
Check out my blog at http://www.ausbonsai.com.au/blog/Watto" onclick="window.open(this.href);return false;
- Keels
- Aussie Bonsai Fan
- Posts: 699
- Joined: December 11th, 2012, 12:13 pm
- Favorite Species: Pines, Eucalyptus and Callistemon
- Bonsai Age: 11
- Bonsai Club: CBS, Goulburn & VNBC
- Location: Canberra
- Has thanked: 223 times
- Been thanked: 257 times
Re: Good old bunnings trident
Too funny watto.... Well i did first read about it on Neil's website many years ago. Let's say unofficial apprentice