Cedrus Deodara
-
- Aussie Bonsai Fan
- Posts: 89
- Joined: October 19th, 2009, 8:53 pm
- Favorite Species: Maple
- Bonsai Age: 2
- Location: Christchurch
- Contact:
Cedrus Deodara
Hi Folks
I have a C.Deodara which I want to start training as an Informal Upright. I would appreciate your suggestions on where to shorten to for the new apex and which branches to use. It has had a growth spurt three quarters the way up. The bottom left branch can be the first branch. The bottom right branch the first right branch. The tree is pretty skint on back branches. Do I bend the 2nd or third left branches as a back branch? The 2nd left branch is thinner but allows a gap to the first right branch, the third left branch is the right thickness but is very close to the height of the right branch.
Above the first right branch the branches are a lot thinner. Do I use these or get rid of them and use the branches higher up which are thicker? Amongst these thicker upper branches is one I could use as the new apex. However I could continue past this grouping of upper branches and form a new apex.
I have attached a photo which hopefully will make this all clearer.
I assume I could wire and trim now and pot in the Spring?
Cedrus Deodara by kauri95, on Flickr
I have a C.Deodara which I want to start training as an Informal Upright. I would appreciate your suggestions on where to shorten to for the new apex and which branches to use. It has had a growth spurt three quarters the way up. The bottom left branch can be the first branch. The bottom right branch the first right branch. The tree is pretty skint on back branches. Do I bend the 2nd or third left branches as a back branch? The 2nd left branch is thinner but allows a gap to the first right branch, the third left branch is the right thickness but is very close to the height of the right branch.
Above the first right branch the branches are a lot thinner. Do I use these or get rid of them and use the branches higher up which are thicker? Amongst these thicker upper branches is one I could use as the new apex. However I could continue past this grouping of upper branches and form a new apex.
I have attached a photo which hopefully will make this all clearer.
I assume I could wire and trim now and pot in the Spring?
Cedrus Deodara by kauri95, on Flickr
-
- Aussie Bonsai Fan
- Posts: 1904
- Joined: January 12th, 2010, 12:02 pm
- Favorite Species: many
- Bonsai Age: 25
- Bonsai Club: yarra valley
- Location: vic
- Been thanked: 1 time
Re: Cedrus Deodara
G'day Fred, good to see you back. Cedar are notoriously slow to thicken so I would suggest you get the root system sorted on your tree then put it into a larger container with a good open potting mix and feed it like crazy to get a bit of weight into the trunk before you even consider styling it.
Craigw
Craigw
- Gerard
- Aussie Bonsai Fan
- Posts: 2656
- Joined: October 7th, 2009, 12:32 pm
- Favorite Species: pines
- Bonsai Age: 16
- Bonsai Club: BSV, Northwest, Northern Suburbs, VNBC
- Location: Melbourne
- Has thanked: 18 times
- Been thanked: 48 times
Re: Cedrus Deodara
Good advice Craig,
The tree will thicken faster with more foliage but it will not hurt at all to put some thick wire on the trunk to get a few curves in this very straight trunk.
C. deodara is a species which is inclined to weep, this makes it more suitable for a cascade or semi-cascade style.
The tree will thicken faster with more foliage but it will not hurt at all to put some thick wire on the trunk to get a few curves in this very straight trunk.
C. deodara is a species which is inclined to weep, this makes it more suitable for a cascade or semi-cascade style.
Q: Why are we all here?
A: Because we are not all there.
A: Because we are not all there.
-
- Aussie Bonsai Fan
- Posts: 7691
- Joined: August 22nd, 2009, 8:41 pm
- Favorite Species: trident maple
- Bonsai Age: 41
- Bonsai Club: Albury/Wodonga; BSV; Canberra; VNBC
- Location: Yackandandah
- Has thanked: 68 times
- Been thanked: 1435 times
- Contact:
Re: Cedrus Deodara
Fred, before trying to work out which branches to use you should think about what height and thickness you anticipate your final tree being. The lowest branch you are proposing as the first branch on your bonsai seems pretty close to the ground - this will probably be too low for a medium sized bonsai I'd say so it probably won't really be the first branch??
Unless you are aiming for a really skinny bonsai, don't worry too much about the branches at this stage. First, build up the trunk. Get some decent bends into it if you want an informal upright. Remember bends tend to straighten as a tree thickens so make initial bends a bit more than looks right at this stage. Also, bends can be made by pruning to a side branch.
I note that there's a group of branches towards the top of the tree. This will thicken that part of the trunk if left. Either remove most or plan to shorten the trunk below that point at some stage.
Unless you are aiming for a really skinny bonsai, don't worry too much about the branches at this stage. First, build up the trunk. Get some decent bends into it if you want an informal upright. Remember bends tend to straighten as a tree thickens so make initial bends a bit more than looks right at this stage. Also, bends can be made by pruning to a side branch.
I note that there's a group of branches towards the top of the tree. This will thicken that part of the trunk if left. Either remove most or plan to shorten the trunk below that point at some stage.
http://shibuibonsai.com.au/" onclick="window.open(this.href);return false;
-
- Aussie Bonsai Fan
- Posts: 25
- Joined: May 26th, 2009, 3:38 am
- Favorite Species: To many to pick from!!!
- Bonsai Age: 40
- Bonsai Club: American Bonsai Society, Nashville Tennesee Bonsai Society and others
- Location: Paducah, Kentucky USA
- Contact:
Re: Cedrus Deodara
Fred,
I'm so glad to see someone else using this material for bonsai. If I were you, I would get the root system flattened and the tree planted into a rather large but low container to let it grow some. In addition, C. deodara buds back quite nicely but you have to do it with branches that have foliage. I would do some preliminary cutting back of those long lanky branches to begin the ramification process right away. At the size that your tree is now, bending that trunk will be quite easy and getting your initial shaping done will help solidify your design and give you direction for the future. I have a couple that I'm working on, a formal upright and another that will be a more natural Natural design. Here is my formal upright. The trunk like yours was thin when I started but it's finally after 8 years beginning to show some cracking and the beginnings of real bark. A few more years (maybe 1/2-3/4 of a decade) and it will be on its way to being called a bonsai.
Randy
I'm so glad to see someone else using this material for bonsai. If I were you, I would get the root system flattened and the tree planted into a rather large but low container to let it grow some. In addition, C. deodara buds back quite nicely but you have to do it with branches that have foliage. I would do some preliminary cutting back of those long lanky branches to begin the ramification process right away. At the size that your tree is now, bending that trunk will be quite easy and getting your initial shaping done will help solidify your design and give you direction for the future. I have a couple that I'm working on, a formal upright and another that will be a more natural Natural design. Here is my formal upright. The trunk like yours was thin when I started but it's finally after 8 years beginning to show some cracking and the beginnings of real bark. A few more years (maybe 1/2-3/4 of a decade) and it will be on its way to being called a bonsai.
Randy
You do not have the required permissions to view the files attached to this post.
Randy Davis
Paducah, Kentucky USA
Paducah, Kentucky USA
-
- Aussie Bonsai Fan
- Posts: 1404
- Joined: June 24th, 2010, 6:23 pm
- Favorite Species: The ones that don't die
- Bonsai Age: 15
- Bonsai Club: Oyama Bonsai Kai, Ausbonsai
- Location: Cape Town, South Africa
- Been thanked: 2 times
-
- Aussie Bonsai Fan
- Posts: 1904
- Joined: January 12th, 2010, 12:02 pm
- Favorite Species: many
- Bonsai Age: 25
- Bonsai Club: yarra valley
- Location: vic
- Been thanked: 1 time
Re: Cedrus Deodara
Here is my Deodara, this tree is well over 30 years in a bonsai pot originally styled in a workshop with Tom Yamamoto, just to give you some idea of how slowly they thicken. It would be a much better tree if the original owner had spent a few years developing the trunk before committing it to a bonsai pot. The tree is over 1m tall and badly needs to be wired to accentuate the stepping in the branches.
Craigw
Craigw
You do not have the required permissions to view the files attached to this post.
- Matthew
- Aussie Bonsai Fan
- Posts: 1843
- Joined: March 8th, 2009, 11:58 am
- Favorite Species: pines and maples
- Bonsai Age: 17
- Bonsai Club: none
- Location: the hills NE victoria
- Has thanked: 17 times
- Been thanked: 179 times
Re: Cedrus Deodara
my large one just over 1 metre tall formal upright. over 30 years old.i have other pics of it alone but do you think i can find them
You do not have the required permissions to view the files attached to this post.
-
- Aussie Bonsai Fan
- Posts: 25
- Joined: May 26th, 2009, 3:38 am
- Favorite Species: To many to pick from!!!
- Bonsai Age: 40
- Bonsai Club: American Bonsai Society, Nashville Tennesee Bonsai Society and others
- Location: Paducah, Kentucky USA
- Contact:
Re: Cedrus Deodara
Great trees Craig and Matthew! I don't know why Americans seem to think this is not good bonsai material. They must not have ever tried it! I'm so glad to see others use this tree too!
Randy
Randy
Randy Davis
Paducah, Kentucky USA
Paducah, Kentucky USA
- BirchMan
- Aussie Bonsai Fan
- Posts: 276
- Joined: June 17th, 2010, 11:36 pm
- Favorite Species: Shimpaku
- Bonsai Age: 12
- Bonsai Club: Bonsai Workshop WA
- Location: Perth
- Has thanked: 85 times
- Been thanked: 48 times
Re: Cedrus Deodara
I also have one that i bought about 6 months ago similar to Fred's. One thing i've heard is they like to spring their branches back to the original position even after leaving wire on for some time. How bad is this effect? Has anyone overcome this by wounding the branch or something else?
-
- Banned
- Posts: 2227
- Joined: July 27th, 2010, 12:12 am
- Favorite Species: Melaleuca
- Bonsai Age: 10
- Contact:
Re: Cedrus Deodara
Birchman , undercutting the branch/slitting the branch have worked well for me in the past, I've found that even though Cedars are slow to gain weight the Cambium grows quite easily/fast where cuts are made, give it a go
- Grant Bowie
- Aussie Bonsai Fan
- Posts: 3809
- Joined: February 18th, 2009, 3:22 pm
- Favorite Species: Banksia
- Bonsai Age: 52
- Bonsai Club: Canberra
- Location: Canberra
- Been thanked: 347 times
Re: Cedrus Deodara
Here is the start of my cedar.
I am happy with its progress.
Grant
I am happy with its progress.
Grant
You do not have the required permissions to view the files attached to this post.
- Gerard
- Aussie Bonsai Fan
- Posts: 2656
- Joined: October 7th, 2009, 12:32 pm
- Favorite Species: pines
- Bonsai Age: 16
- Bonsai Club: BSV, Northwest, Northern Suburbs, VNBC
- Location: Melbourne
- Has thanked: 18 times
- Been thanked: 48 times
Re: Cedrus Deodara
I have one styled as a semi cascade
You do not have the required permissions to view the files attached to this post.
Q: Why are we all here?
A: Because we are not all there.
A: Because we are not all there.
-
- Aussie Bonsai Fan
- Posts: 1904
- Joined: January 12th, 2010, 12:02 pm
- Favorite Species: many
- Bonsai Age: 25
- Bonsai Club: yarra valley
- Location: vic
- Been thanked: 1 time
Re: Cedrus Deodara
Birchman, while I am not opposed to scarring some trees species with wire its not such a good idea with cedar because you will find they thicken very quickly when scarred and also because the bark is pretty smooth the scars show for many years. I have a few cedars here which I bought from an old friend of mine now about 30 years old, they need to be wired constantly. While it is possible to set the main branch structure all the sub-branches and especially the twigs never seem to set so when the old wire comes off new wire goes on. Look forward to a life time of wiring.
Matthew your cedar looks like a lovely tree however the trunk would seem much more powerful if the branches were shorter.
Craigw
Matthew your cedar looks like a lovely tree however the trunk would seem much more powerful if the branches were shorter.
Craigw
- Matthew
- Aussie Bonsai Fan
- Posts: 1843
- Joined: March 8th, 2009, 11:58 am
- Favorite Species: pines and maples
- Bonsai Age: 17
- Bonsai Club: none
- Location: the hills NE victoria
- Has thanked: 17 times
- Been thanked: 179 times
Re: Cedrus Deodara
craig ill have a think about it for next spring. next time im down your way ill bring it to you for a lookie if you dont mind