[Tutorial] Willow Leaf Ficus for Shohin Bonsai

Discussions and pictures relating to bonsai under 25cm in height.

[Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby Steven » December 6th, 2010, 1:42 pm

Following on from our recent discussions on Shohin bonsai and the popularity of the tutorial How to Develop Dynamic Figs Quickly, I am pleased to present to you the following article written by Robert Kempinski, who states that "Bonsai are like potato chips – No one can have just one!" Rob is the current President of Bonsai Clubs International as well as a successful businessman. Robs blog is the Mahogany Row Studio and he has some excellent examples of Shohin bonsai displayed.

I trust you will enjoy the article and I look forward to the discussions generated.

Regards,
Steven

Willow Leaf Ficus for Shohin Bonsai

Introduction
The Willow Leaf Ficus has grown into one of the most popular and perhaps best ficus trees for creating a shohin bonsai specimen. It’s a tropical tree easy to care for, versatile to style, not fussy about water or light that can thrive in either outdoor summer conditions or in indoor culture. The small leaves look good in shohin size pots and it can develop fine ramification in scale with the smaller trees. Every shohin bonsai enthusiast should have several in their collection.

FIGURE 1.jpg

Species Characteristics
There remains considerable discussion about the Willow Leaf Ficus’ true Latin name which has changed over the last several years from Ficus salicifolia, (a direct translation of the common name Willow Leaf Ficus), to Ficus neriifolia, (nerii refers to the genus Oleander which has narrow leaves but is not a ficus), to Ficus salicaria. In 2004 a botanist published an article declaring it as a new species and calling it the Ficus salicaria. Salicara is latin for “Willow-like.” (The citation is Berg, C.C. 2004. A new species of Ficus (Moraceae) of uncertain provenance. Brittonia 56(1): 54-57. As Berg named it the full name would be Ficus salicaria CC Berg.)
The origins of the Willow Leaf Ficus are a mystery. No bonsai artist has reported seeing a Ficus salicaria in the wild. Jim Smith, the Florida expert on this Ficus, believes it is a native of South Africa, although the South African tree has larger leaves. But doubt exists about it coming from South Africa as that area has an arid climate and the ficus appears to prefer a more humid environment. Dr. Enrique Castano, a Mexican microbiologist and bonsai enthusiast, compared its DNA to that of the similar looking Ficus Pertusa in Latin America and found it did not match. It’s possible that the Willow Leaf Ficus is a sport of some other ficus and may not exist in the wild. It first appeared at a South Florida orchid nursery in the 1950 or 1960s. Perhaps one of those avid orchid hunters of that period brought it back from some exotic jungle locale. Since not even Berg knows where the tree originally came from, the mystery will only be solved when some intrepid bonsai artist finds the long lost mother grove. Until then, one can only wonder.
The tree was first started as a bonsai by the late Joe Samuels, of Miami, Florida in the early 1970’s. Joe found the plant at that South Florida nursery and over several years convinced the owner to sell the only sample to him. Joe developed the famous “Cloud” banyan-style bonsai from it. Since cuttings readily root soon many Florida bonsai nurseries and growers developed specimens and started selling them.
There is one common variation in the bonsai trade that is due to some unusual genetic mutation – Ficus 89. This mutation occurred at Jim Smith’s nursery in Vero Beach, Florida, during a freeze in 1989. The trees appeared to die from the cold, but certain specimens eventually budded again, however the leaves on these changed and returned larger and longer. Jim called them “Ficus 89.” These Ficus 89 are not ideal for shohin bonsai due to the larger leaf size. While the Ficus 89 will respond to leaf reduction techniques, the smaller leaf variety responds just as well and starts from a smaller leaf, hence better for shohin.

Styles
The Willow Leaf Ficus has stylistic versatility. It can be made into virtually any style from formal upright to cascade. The only style that doesn’t work is driftwood attached as the dead wood of the Ficus is not very hard nor very durable. Deadwood branches don’t last long. Holes and scars can be used but expect them to rot over the years.

FIGURE 2.jpg

One style that this tree assumes very well is the shohin sumo style. A short fat trunk reminiscent of a sumo wrestler can be developed from the swollen roots or trunks of a chopped tree.

FIGURE 3.jpg

Bonsai Traits and Care
The Willow Leaf Ficus has eminently suitable traits for shohin bonsai. It makes small narrow leaves that respond well to leaf reduction techniques. It grows quickly so it can develop into a shohin style in a short time. The fast growth also means it will develop ramification in a one or two seasons giving the feel of a mature bonsai.
It thrives in shallow pots and hardly needs any roots for growth. However little root room will slow development so it’s best to put only finished shohin bonsai in a very small pot. The Willow Leaf Ficus can grow in virtually any soil. In fact, it can grow without soil if given sufficient humidity and liquid fertilizer. As with all bonsai the amount and timing of water used depends on soil size, temperature and root mass. Fortunately the tree isn’t fussy and can tolerate wet roots and dry roots although it will thrive if the surface of the soil dries out between watering.
Root development requires the most attention to create a good shohin bonsai. This tree, like many other ficus will make vigorous roots, called tubers. These tubers will develop underground or at the surface and can quickly ruin the scale of a shohin bonsai. Fortunately these tubers can be cut and carved and will create new smaller roots from the cut surfaces.
Another interesting root feature is its propensity to make aerial roots. Under very humid conditions and with a dense tropical canopy the tree will drop aerial roots which are indicative of a tropical tree and can be incorporated into a shohin bonsai design.
The tree’s scar healing capability is only average. Small scars will heal but major scars don’t seem to fully cover over. The exception entails a shohin made from a root cutting. For some reason the root tissue seems to form a complete callous much better than trunk tissue.

Shohin Bonsai Care
Care will vary depending on the growers’ location. As a tropical tree, it can’t survive any freezing weather and prefers to be hot and humid. In tropical regions they grow outdoors in full sun all year long and barely take a dormant period. For those in temperate climates, the tree can thrive in indoor culture provided its tropical environment is mimicked to a degree. That is it needs to stay warm and humid and have sufficient light.
The tree will enjoy most any fertilizer types. Miracle Grow granular gives great results as the granules give a bit of nutrient to the tree with each watering. The trick is keeping the granular fertilizer on the small surface of the shohin pots. Liquid fertilizer works as well but must be given regularly as this tree is always growing. Organic fertilizer can satisfy the plants needs but might be too smelly for indoor cultivation.
Shaping follows regular bonsai techniques. The tree responds well to aluminum wiring although the wire can dig in rather quickly if the tree is growing vigorously. Smaller twigs will also respond to manual manipulation – that is bending a branch each day in the desired direction. This however is a time and labor intensive process so wiring offers a more efficient method to style the tree. The tree can also be grown with the clip and grow technique.
Regular defoliation can help develop ramification. When performing defoliation, cut the leaves just above the petiole. Some growers will pull the leaves off to save time but this is a bit crude, even if the tree will tolerate it. Pinching new growth will reduce the leaf size. The new leaves appear in a pleasing orange color that soon turns light green.

Pests and Disease
The leaves are susceptible to fungus. The leaves will turn brown and some ramification lost. If defoliated and fungicide provided quickly the damage can be contained.
Scale is the most common insect. They can be removed manually or treated with dishwasher soap or insecticidal oil. Indoors you might find white flies. Borers can be deadly as they can girdle a tree and kill all live growth above the girdle. Systemic pesticide will help prevent the borers.

Propagation
This tree is extremely easy and fun to propagate. Cuttings root so readily that it’s not unusual for Florida growers that hate to throw away clippings to have hundreds of cuttings after a major pruning session. Placing a bit of rooting hormone and keeping the cutting moist but not submerged will grow a new tree. Root cuttings also will sprout buds and make trees. These cuttings having grown in the confines of a container can have very interesting shapes very suitable for shohin bonsai. The trees also air layer very readily, in fact the aerial roots can actually support the growth of a new tree.
The Willow Leaf Ficus sometimes makes a small fig. To date no American growers have noticed viable seeds from these figs due to the fig’s symbiosis with a specialized insect. Most ficus require a wasp to fertilize the flowers which lie in the interior of the fig. The female wasp enters a small stoma in the bottom of the fig to lay eggs and in turn distributes the pollen to the seeds. Perhaps the wasp species unique to the Willow Leaf Fig doesn’t live in North America.

Case Studies
Here are a few case studies to illustrate the development of a shohin Willow Leaf Ficus.
The first is a shohin bonsai called “Rigatoni”. In 1999 this bonsai started from a simple tubular cutting akin to a piece of rigatoni pasta. The cutting was about 1.75 inches tall and about 3/4 inch diameter in 1999.

FIGURE 4.jpg

After it sprouted numerous buds, a leader was selected to make an informal upright tree. Usually when developing a ficus, branches are pruned very short and regrown to develop taper. This approach is a bit different than working with a juniper or pine. A ficus can be grown into a design instead of wired to heavily contort the branches to move the foliage pads in close.

It has since developed into a shohin bonsai – about 5 inches tall.

Here it is with and without leaves. When developing the pads, prune them as triangles when looking from the side and from the top. With shohin size trees, the pads will merge into one another as there isn’t room to “let the birds fly through.” The surface roots to the right formed as a result of a tuber that was allowed to grow and then cut and carved. It gives the tree a sense of maturity. The pot is a hand signed Japanese pot I picked up in Japan.

FIGURE 5.jpg

FIGURE 6.jpg

FIGURE 7.jpg

Root Cutting Example
This shohin Ficus bonsai started as a root cutting in 2004. An interesting portion of Willow Leaf Ficus root was trimmed at both ends and left free to grow for a year.

FIGURE 8.jpg

Regular pruning kept the non leader branches short and thin- a critical step in shohin Willow Leaf Ficus development. Also note the granular fertilizer on the soil. The slanting shape on the right of the tree came from the clever use of a root to add trunk mass. Aerial roots can also provide this function.

FIGURE 9.jpg

FIGURE 10.jpg

Gallery
Here are some other shohin Willow Leaf Ficus trees to enjoy.

FIGURE 11.jpg

FIGURE 12.jpg

FIGURE 13.jpg
You do not have the required permissions to view the files attached to this post.
Check out the AusBonsai Store ǀ Wiki ǀ Blogs ǀ Gallery ǀ 360˚ ǀ
Remember to be polite and abide by the Spirit and Intent of AusBonsai
User avatar
Steven
Site Admin
Site Admin
 
Posts: 3371
Images: 734
Joined: November 7th, 2008, 11:21 am
Location: Sydney
Favorite Species: Casuarina
Bonsai Age: 15
Bonsai Club: AusBonsai & The School of Bonsai

Re: [Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby Matthew » December 6th, 2010, 2:36 pm

Steven thankyou for this awesome article. I ahve seen one or 2 of the pics b4 and i keep coming back to look at them. i have about 30 cuttings already striked atm and plan to do a few hundred in time. i love willowleafs :D
User avatar
Matthew
Aussie Bonsai Fan
Aussie Bonsai Fan
 
Posts: 1609
Images: 0
Joined: March 8th, 2009, 11:58 am
Location: wangaratta
Favorite Species: pines and maples
Bonsai Age: 10
Bonsai Club: rockhampton bonsai club

Re: [Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby Pup » December 6th, 2010, 4:08 pm

Thank you Steven, it shows what can be achieved in a short period of time. When it comes to Shohin and Mame.

One correction though mate ;) Robert is the 1st Vice President , Mr I.Chi Su is the president.

Cheers mate does that make it 12 now, ;) .

Cheers :) Pup
IN THE LIGHT OF KNOWLEDGE ATTAINED, ACHIEVEMENT IS WITHIN SIGHT

I am not a complete fool, some parts are missing
User avatar
Pup
Knowledgeable rogue
Knowledgeable rogue
 
Posts: 6343
Images: 67
Joined: November 12th, 2008, 5:19 pm
Location: Southern Suburbs of Perth Western Australia
Favorite Species: melaleucas
Bonsai Age: 31
Bonsai Club: Bonsai society of Western Australia

Re: [Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby Steven » December 6th, 2010, 4:36 pm

Pup wrote:One correction though mate ;) Robert is the 1st Vice President , Mr I.Chi Su is the president.


I think they need to update their website... From the horses mouth;
Rob Kempinski wrote:It would be nice to give BCI a plug as I am the current president and we are always looking for individual members.


And no, still 11 ;)

Regards,
Steven
Check out the AusBonsai Store ǀ Wiki ǀ Blogs ǀ Gallery ǀ 360˚ ǀ
Remember to be polite and abide by the Spirit and Intent of AusBonsai
User avatar
Steven
Site Admin
Site Admin
 
Posts: 3371
Images: 734
Joined: November 7th, 2008, 11:21 am
Location: Sydney
Favorite Species: Casuarina
Bonsai Age: 15
Bonsai Club: AusBonsai & The School of Bonsai

Re: [Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby Pup » December 6th, 2010, 5:11 pm

Steven wrote:
Pup wrote:One correction though mate ;) Robert is the 1st Vice President , Mr I.Chi Su is the president.


I think they need to update their website... From the horses mouth;
Rob Kempinski wrote:It would be nice to give BCI a plug as I am the current president and we are always looking for individual members.


And no, still 11 ;)

Regards,
Steven


G,day Steven yes they do, in the latest edition of Bonsai & Stone appreciation Magazine, the official Magazine for Bonsai Clubs International volume 49 number 4

October/ November/December 2010, he is listed as 1st vice president, with Willi Benz of Germany as second Vice president.

There are two representatives, from Australia. With Glenis Bebb as Executive Director.,and Ian Glew being a Director, in charge of the Diplomatic Mailbag.

as for still only 12 :oops: 11 bugger

Cheers ;) Pup
IN THE LIGHT OF KNOWLEDGE ATTAINED, ACHIEVEMENT IS WITHIN SIGHT

I am not a complete fool, some parts are missing
User avatar
Pup
Knowledgeable rogue
Knowledgeable rogue
 
Posts: 6343
Images: 67
Joined: November 12th, 2008, 5:19 pm
Location: Southern Suburbs of Perth Western Australia
Favorite Species: melaleucas
Bonsai Age: 31
Bonsai Club: Bonsai society of Western Australia

Re: [Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby makro » August 11th, 2015, 9:03 am

amazing photos.... Thanks for the info Steven
Cheers
MakRo
"The reward is in the doing of it..." quote from the "The World's Fastest Indian"
Bonsai Northwest
User avatar
makro
Aussie Bonsai Fan
Aussie Bonsai Fan
 
Posts: 133
Joined: April 19th, 2009, 7:37 am
Location: Melbourne
Favorite Species: Juniper, Maple
Bonsai Age: 2
Bonsai Club: Bonsai Northwest

Re: [Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby EdwardH » August 11th, 2015, 9:29 am

Thanks for the post Steven, very interesting article. is this where you got your inspiration for your shohins?
EdwardH
Aussie Bonsai Fan
Aussie Bonsai Fan
 
Posts: 549
Joined: January 12th, 2009, 6:05 pm
Location: Sydney
Favorite Species: Those that survive
Bonsai Age:

Re: [Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby bonsai_beginner » March 4th, 2016, 7:23 pm

This is a fantastic article! Thank you very much


Sent from my iPhone using Tapatalk
bonsai_beginner
Aussie Bonsai Fan
Aussie Bonsai Fan
 
Posts: 243
Joined: July 19th, 2015, 9:11 pm
Location: Melbourne
Favorite Species: ficus
Bonsai Age:

Re: [Tutorial] Willow Leaf Ficus for Shohin Bonsai

Postby bodhidharma » March 5th, 2016, 10:04 am

A great article and handy for me as i have had one hidden away for a while. This has given me inspiration to further develop it. Interesting on the leaf though that mine appear thinner, much thinner than the one's here. Are there different willow leaf fig's :?:
"Advice is rarely welcome, and the one's who need it the most welcome it the least"
User avatar
bodhidharma
Aussie Bonsai Fan
Aussie Bonsai Fan
 
Posts: 5004
Images: 12
Joined: August 13th, 2009, 1:14 pm
Location: Daylesford, Victoria....Central Highlands
Favorite Species: English Elm
Bonsai Age: 24
Bonsai Club: goldfields


Return to Shohin

Who is online

Users browsing this forum: No Members and 1 guest