ask questions before you buy?

A place to talk about Australian bonsai potters and pottery.
User avatar
joannm
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 170
Joined: May 7th, 2013, 3:23 pm
Favorite Species: Saotome Azalea
Bonsai Age: 45
Bonsai Club: Bonsai Society of Victoria
Location: melbourne
Has thanked: 3 times
Been thanked: 12 times
Contact:

ask questions before you buy?

Post by joannm »

I would love to see some other potters come to the party as I am not getting anything else done , other than making pots.
HOWEVER !!! PLEASE please please :palm: ,
you ask so many questions on how to do your plants , what to cut, what to , what to and what to ???????
but you are not asking questions about people who have never made bonsai pots," what they are doing ?".
a large proportion of potters who sell at markets and studio work , make earthenware low fired pots. :shake: :shake: this is not good for bonsai. Nor is Raku .

you may find yourself loosing that pride and joy you have nurtured .
due to the pot retaining too much moisture and cracking because of this,
or under watering cause the pot doesn't retain water .

suggest you do some googling , read comments from around the world :reading:

a potter is not a bonsai potter until they have the answers to the Q's.

joann
shibui
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 7653
Joined: August 22nd, 2009, 8:41 pm
Favorite Species: trident maple
Bonsai Age: 41
Bonsai Club: Albury/Wodonga; BSV; Canberra; VNBC
Location: Yackandandah
Has thanked: 65 times
Been thanked: 1399 times
Contact:

Re: ask questions before you buy?

Post by shibui »

These are very good points Joanne. Because we are not potters and do not understand clay or firing we just don't know that there are even issues let alone the right questions to ask :lost:

I have a vague awareness of the problems arising from low temp fired pots because I have a couple that I have made or found or bought and I know from experience that it is dreadfully hard to keep trees healthy in them - too porous so they dry out far too quickly so I have stopped putting bonsai into those pots. I have also heard others commenting that some cheap Chines bonsai pots are too porous as well - not fired correctly?

Maybe you can find the time to elaborate a little on the possible pitfalls of bonsai pots from a potting point of view? I, for one, would value your expert advice.
http://shibuibonsai.com.au/" onclick="window.open(this.href);return false;
User avatar
MoGanic
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 1250
Joined: May 3rd, 2012, 7:15 pm
Favorite Species: Shimpaku
Bonsai Age: 0
Location: Victoria

Re: ask questions before you buy?

Post by MoGanic »

Wow never even thought to ask any of these q's.

I guess the next logical question would be, if I've bought a bunch of pots how do I tell whats good and what isn't without putting trees in them?

Cheers,
Mo


Sent from my iPhone using Tapatalk
There are many ways to do things, but only one "best" way.
User avatar
Rory
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 2807
Joined: January 23rd, 2013, 11:19 pm
Favorite Species: Baeckea Phebalium Casuarina & Banksia
Bonsai Age: 24
Location: Central Coast, NSW
Has thanked: 22 times
Been thanked: 456 times

Re: ask questions before you buy?

Post by Rory »

MoGanic wrote:Wow never even thought to ask any of these q's.

I guess the next logical question would be, if I've bought a bunch of pots how do I tell whats good and what isn't without putting trees in them?

Cheers,
Mo


Sent from my iPhone using Tapatalk
Oh pleeeease. That is easy. Put a crappy tree in it, and if it dies, then don't use the pot in future.....question owned! :whistle:
Seriously though...don't know whether its a co-incidence but I did have cheap crappy pots that I bought when I first started in the late 90's that I bought from a well known bonsai nursery, and some of them did seem to retain moisture more than others, so I binned them thinking they were jinxed. I now have many pots from a few well known experienced potters on here and I've never had a problem with them in hindsight.
Last edited by Rory on March 6th, 2015, 1:55 pm, edited 1 time in total.
Rory
I style Bonsai naturally, just as they would appear in the wild.
Central Coast, NSW
Bonsai: Casuarina Leptospermum Banksia Phebalium Baeckea Melalueca Ficus

Growing Australian natives as Bonsai: viewtopic.php?p=289480#p289480

Buying and repotting Native nursery material: viewtopic.php?f=78&t=30724

Growing tips for Casuarina as Bonsai: viewtopic.php?p=244995#p244995

How to reduce moss from the trunk without damaging the bark: viewtopic.php?p=295227#p295227
rodm
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 341
Joined: May 19th, 2010, 7:12 pm
Favorite Species: Pines junipers and others
Bonsai Age: 40
Location: Tamworth NSW
Has thanked: 1 time
Been thanked: 13 times

Re: ask questions before you buy?

Post by rodm »

Ok, so what are questions we should be asking? :?: ;)
Cheers Rod
User avatar
Ray M
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 1403
Joined: November 5th, 2009, 3:36 pm
Favorite Species: Figs, Junipers, Maples, Elms, Pines, Banksias
Bonsai Age: 31
Bonsai Club: The School of Bonsai
Location: Winston Hills NSW
Been thanked: 15 times

Re: ask questions before you buy?

Post by Ray M »

joannm wrote:I would love to see some other potters come to the party as I am not getting anything else done , other than making pots.
HOWEVER !!! PLEASE please please :palm: ,
you ask so many questions on how to do your plants , what to cut, what to , what to and what to ???????
but you are not asking questions about people who have never made bonsai pots," what they are doing ?".
a large proportion of potters who sell at markets and studio work , make earthenware low fired pots. :shake: :shake: this is not good for bonsai. Nor is Raku .

you may find yourself loosing that pride and joy you have nurtured .
due to the pot retaining too much moisture and cracking because of this,
or under watering cause the pot doesn't retain water .

suggest you do some googling , read comments from around the world :reading:

a potter is not a bonsai potter until they have the answers to the Q's.

joann
Hi Joann,
Thanks for raising this issue. I too would love to know a lot more about this subject. If you could put a list of questions together, that would give a guide as to what to look for, would be really helpful and I for one would be most grateful.

Regards Ray
User avatar
kcpoole
Perpetual Learner
Perpetual Learner
Posts: 12272
Joined: November 12th, 2008, 4:02 pm
Favorite Species: Maple
Bonsai Age: 15
Bonsai Club: the School Of Bonsai
Location: Western Sydney, NSW, Australia
Has thanked: 17 times
Been thanked: 84 times
Contact:

Re: ask questions before you buy?

Post by kcpoole »

Maybe we can compile all the info and add / update the Wiki here
https://www.ausbonsai.com.au/wiki/index. ... Bonsai_pot

some info to get
what makes a good Bonsai container?
shapes
clay types
firing temps
surface finishes

What type / shape of trees suit what type of pots

From the Wiki this thread was found too which answers a lot too, viewtopic.php?f=29&t=8580

Ken
Check out our Wiki for awesome bonsai information www.ausbonsai.com.au/wiki
What is Bonsai? http://www.ausbonsai.com.au/wiki/index.php?title=Bonsai
What should I do now? http://www.ausbonsai.com.au/wiki/index.php?title=Newbie
How do I grow a Bonsai? http://www.ausbonsai.com.au/wiki/index. ... _a_Bonsai?
Visit a Bonsai nursery to see some real nice trees http://www.ausbonsai.com.au/wiki/index. ... _Nurseries
User avatar
Jason
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 1543
Joined: November 23rd, 2012, 1:00 pm
Favorite Species: Melaleuca and Callistemon
Bonsai Age: 3
Bonsai Club: Bonsai Society of WA
Location: Perth
Been thanked: 1 time
Contact:

Re: ask questions before you buy?

Post by Jason »

Tickle me curious also

I'd love to know how to tell the difference between a quality, and a not-so-quality bonsai pot

My judgement goes as far as "Oh, that looks nice" :lol:
Have a question? The AusBonsai Wiki most likely has the answer!

Looking for a Nursery or Club near your? Check out the AusBonsai Directory which lists them all

Image
User avatar
kcpoole
Perpetual Learner
Perpetual Learner
Posts: 12272
Joined: November 12th, 2008, 4:02 pm
Favorite Species: Maple
Bonsai Age: 15
Bonsai Club: the School Of Bonsai
Location: Western Sydney, NSW, Australia
Has thanked: 17 times
Been thanked: 84 times
Contact:

Re: ask questions before you buy?

Post by kcpoole »

I am the same Jasonc
I have hep Japanese pots and also some Chinese ones. I have no idea why they are not premium pots?
Check out our Wiki for awesome bonsai information www.ausbonsai.com.au/wiki
What is Bonsai? http://www.ausbonsai.com.au/wiki/index.php?title=Bonsai
What should I do now? http://www.ausbonsai.com.au/wiki/index.php?title=Newbie
How do I grow a Bonsai? http://www.ausbonsai.com.au/wiki/index. ... _a_Bonsai?
Visit a Bonsai nursery to see some real nice trees http://www.ausbonsai.com.au/wiki/index. ... _Nurseries
User avatar
Pup
Knowledgeable rogue
Knowledgeable rogue
Posts: 6357
Joined: November 12th, 2008, 5:19 pm
Favorite Species: melaleucas
Bonsai Age: 31
Bonsai Club: Bonsai society of Western Australia
Location: Southern Suburbs of Perth Western Australia
Been thanked: 35 times
Contact:

Re: ask questions before you buy?

Post by Pup »

Jason wrote:Tickle me curious also

I'd love to know how to tell the difference between a quality, and a not-so-quality bonsai pot

My judgement goes as far as "Oh, that looks nice" :lol:
I was taught by an old friend whom had a bonsai nursery in the Perth area many moons ago. At that time it was the only Bonsai specialist nursery in the state.
Having that honour, he was allowed to buy from all pot sellers as there was no competition.
He wanted to know the same how to tell quality from crap.
What he was told was quite amusing it entailed a certain act of putting ones tounge on the surface of the pot, gently and feeling for the draw on the tounge.
I laughed too then on the QT tried it.
I have pots that I know are quality and also not so and using this method, it does work have I proven this to myself.
So after saying this you all wish to have a laugh here they are :lol: :lol: :lol: :lol: . It does work. Cheers Pup :tounge: The bottom of the glazed one
We still need to ask at what temp it was fired? is it stoneware or terracotta. Is it porous?, not needed in Australia but will it crack if frozen ( unless you are in the mountains where you get frozen out)
Cheers Pup
Last edited by Pup on March 6th, 2015, 5:24 pm, edited 2 times in total.
IN THE LIGHT OF KNOWLEDGE ATTAINED, ACHIEVEMENT IS WITHIN SIGHT

I am not a complete fool, some parts are missing
User avatar
Nate.bonsai
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 294
Joined: July 20th, 2014, 12:30 pm
Favorite Species: JBP
Bonsai Age: 10
Location: Sydney
Has thanked: 3 times
Been thanked: 33 times

Re: ask questions before you buy?

Post by Nate.bonsai »

Absolutely. I lick everything before I buy. White goods, trees, automobiles, pets... Perhaps the secret was that he got a discount because no one wanted to buy after he got to first base with a pot...
User avatar
Jason
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 1543
Joined: November 23rd, 2012, 1:00 pm
Favorite Species: Melaleuca and Callistemon
Bonsai Age: 3
Bonsai Club: Bonsai Society of WA
Location: Perth
Been thanked: 1 time
Contact:

Re: ask questions before you buy?

Post by Jason »

Pup wrote:
Jason wrote:Tickle me curious also

I'd love to know how to tell the difference between a quality, and a not-so-quality bonsai pot

My judgement goes as far as "Oh, that looks nice" :lol:
I was taught by an old friend whom had a bonsai nursery in the Perth area many moons ago. At that time it was the only Bonsai specialist nursery in the state.
Having that honour, he was allowed to buy from all pot sellers as there was no competition.
He wanted to know the same how to tell quality from crap.
What he was told was quite amusing it entailed a certain act of putting ones tounge on the surface of the pot, gently and feeling for the draw on the tounge.
I laughed too then on the QT tried it.
I have pots that I know are quality and also not so and using this method, it does work have I proven this to myself.
So after saying this you all wish to have a laugh here they are :lol: :lol: :lol: :lol: . It does work. Cheers Pup :tounge: The bottom of the glazed one
We still need to ask at what temp it was fired? is it stoneware or terracotta. Is it porous?, not needed in Australia but will it crack if frozen ( unless you are in the mountains where you get frozen out)
Cheers Pup
That hilarious Pup! But if its works then why not :tu: One of the tricks of the trade I guess!
I couldn't see myself walking around a shop doing it, but would be a good way to tell on my own pots :P
Have a question? The AusBonsai Wiki most likely has the answer!

Looking for a Nursery or Club near your? Check out the AusBonsai Directory which lists them all

Image
User avatar
Jarad
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 1232
Joined: November 27th, 2014, 1:04 pm
Favorite Species: Juniperus, Melaleuca, Taxodium
Bonsai Age: 9
Location: Perth, WA
Has thanked: 22 times
Been thanked: 13 times

Re: ask questions before you buy?

Post by Jarad »

:lol: thanks Pup!

Nate :lol: :lol: love it.

Why couldn't we have started this thread tomorrow night, now everyone is going to be licking everything tomorrow...
-Jarad

I don't trust Bonsai, they are a little shady.
User avatar
Josh
Aussie Bonsai Fan
Aussie Bonsai Fan
Posts: 1518
Joined: January 9th, 2012, 9:28 pm
Favorite Species: pines
Bonsai Age: 4
Bonsai Club: Mt Waverly
Location: Mornington Peninsular, VIc
Has thanked: 6 times
Been thanked: 15 times
Contact:

Re: ask questions before you buy?

Post by Josh »

Pup wrote:
Jason wrote:Tickle me curious also

I'd love to know how to tell the difference between a quality, and a not-so-quality bonsai pot

My judgement goes as far as "Oh, that looks nice" :lol:
I was taught by an old friend whom had a bonsai nursery in the Perth area many moons ago. At that time it was the only Bonsai specialist nursery in the state.
Having that honour, he was allowed to buy from all pot sellers as there was no competition.
He wanted to know the same how to tell quality from crap.
What he was told was quite amusing it entailed a certain act of putting ones tounge on the surface of the pot, gently and feeling for the draw on the tounge.
I laughed too then on the QT tried it.
I have pots that I know are quality and also not so and using this method, it does work have I proven this to myself.
So after saying this you all wish to have a laugh here they are :lol: :lol: :lol: :lol: . It does work. Cheers Pup :tounge: The bottom of the glazed one
We still need to ask at what temp it was fired? is it stoneware or terracotta. Is it porous?, not needed in Australia but will it crack if frozen ( unless you are in the mountains where you get frozen out)
Cheers Pup
This reminds me of being in Andamooka (opal mining town SA). The locals told us not to catch opal fever. When looking for opal and good way to show the opal up in the dust and dirt is to wet it. You take a spray bottle with you when looking for opal and spray the rocks you think might have opal in them. The slightest sliver of opal will show up when wet. Anyway after about a month or so of crawling around mounds of dirt we were out one evening and found a couple of nice pieces of opal, we were on a roll. Suddenly our water ran out :o we were in a good spot and hopeful of a big find. Next I find myself licking rocks, I look at my wife and yell.....Oh no, I have opal fever. This is what the locals were talking about :lol: :lol:
Pup, I would say you have pot fever :tu: :tu:

Josh
User avatar
Pup
Knowledgeable rogue
Knowledgeable rogue
Posts: 6357
Joined: November 12th, 2008, 5:19 pm
Favorite Species: melaleucas
Bonsai Age: 31
Bonsai Club: Bonsai society of Western Australia
Location: Southern Suburbs of Perth Western Australia
Been thanked: 35 times
Contact:

Re: ask questions before you buy?

Post by Pup »

Josh wrote:
Pup wrote:
Jason wrote:Tickle me curious also

I'd love to know how to tell the difference between a quality, and a not-so-quality bonsai pot

My judgement goes as far as "Oh, that looks nice" :lol:
I was taught by an old friend whom had a bonsai nursery in the Perth area many moons ago. At that time it was the only Bonsai specialist nursery in the state.
Having that honour, he was allowed to buy from all pot sellers as there was no competition.
He wanted to know the same how to tell quality from crap.
What he was told was quite amusing it entailed a certain act of putting ones tounge on the surface of the pot, gently and feeling for the draw on the tounge.
I laughed too then on the QT tried it.
I have pots that I know are quality and also not so and using this method, it does work have I proven this to myself.
So after saying this you all wish to have a laugh here they are :lol: :lol: :lol: :lol: . It does work. Cheers Pup :tounge: The bottom of the glazed one
We still need to ask at what temp it was fired? is it stoneware or terracotta. Is it porous?, not needed in Australia but will it crack if frozen ( unless you are in the mountains where you get frozen out)
Cheers Pup
This reminds me of being in Andamooka (opal mining town SA). The locals told us not to catch opal fever. When looking for opal and good way to show the opal up in the dust and dirt is to wet it. You take a spray bottle with you when looking for opal and spray the rocks you think might have opal in them. The slightest sliver of opal will show up when wet. Anyway after about a month or so of crawling around mounds of dirt we were out one evening and found a couple of nice pieces of opal, we were on a roll. Suddenly our water ran out :o we were in a good spot and hopeful of a big find. Next I find myself licking rocks, I look at my wife and yell.....Oh no, I have opal fever. This is what the locals were talking about :lol: :lol:
Pup, I would say you have pot fever :tu: :tu:

Josh
I also have some very fine quality pots. :tounge: :lol:
IN THE LIGHT OF KNOWLEDGE ATTAINED, ACHIEVEMENT IS WITHIN SIGHT

I am not a complete fool, some parts are missing
Post Reply

Return to “Australian Bonsai Potters”