[GROUP BUY] Carbide carving bits
Forum rules
You must have made a minimum of 50 posts on AusBonsai before you are able to advertise here.
You must read and abide by all the rules in the following thread viewtopic.php?f=97&t=1573
You must have made a minimum of 50 posts on AusBonsai before you are able to advertise here.
You must read and abide by all the rules in the following thread viewtopic.php?f=97&t=1573
- Gary Bee
- Aussie Bonsai Fan
- Posts: 133
- Joined: December 7th, 2008, 8:20 pm
- Favorite Species: Most
- Bonsai Age: 12
- Bonsai Club: The School of Bonsai/Bonsai Society of Australia
- Location: SYDNEY
Re: [GROUP BUY] Carbide carving bits
G/Day! Jamie,
Count me in for two lots please?
Let me know when you want the cash, and how best to get it to you.
Regards
Gary
Count me in for two lots please?
Let me know when you want the cash, and how best to get it to you.
Regards
Gary
Yamadori is purely Bonsai in spades
My Avatar is a female Apis Mellifera (honey bee) from before 2600BC
Up until now she has been responsible for pollinating 80% of mankind's fruit and vegetables
as well as 90% of mother earth's flowers. What if...............?
My Avatar is a female Apis Mellifera (honey bee) from before 2600BC
Up until now she has been responsible for pollinating 80% of mankind's fruit and vegetables
as well as 90% of mother earth's flowers. What if...............?
- Gumnuts
- Aussie Bonsai Fan
- Posts: 57
- Joined: January 21st, 2009, 7:22 am
- Favorite Species: Ficus/elm/maple
- Bonsai Age: 10
- Bonsai Club: none
- Location: Sydney (Dural)
Re: [GROUP BUY] Carbide carving bits
Jamie
I recently bought a simialr looking set at Bunn....s . They were cheap but seemed to clog up with wood very quickly.
How do these ones perform?????
Thanks
I recently bought a simialr looking set at Bunn....s . They were cheap but seemed to clog up with wood very quickly.
How do these ones perform?????
Thanks
Good planets are hard to find.
-
- Aussie Bonsai Fan
- Posts: 58
- Joined: September 15th, 2009, 9:46 am
- Bonsai Age: 5
- Location: Bundoora, Victoria
- Been thanked: 1 time
Re: [GROUP BUY] Carbide carving bits
Hi Jamie
If their around that price, put me down for 2 sets.
Brad
If their around that price, put me down for 2 sets.

Brad
- Jamie
- Bonsai passionardo
- Posts: 6829
- Joined: August 21st, 2009, 8:08 pm
- Favorite Species: CLERO!!!,ficus, celtis, juniper, elms
- Bonsai Age: 9
- Bonsai Club: AUSBONSAI.COM
- Location: queensland, Hervey Bay
- Been thanked: 2 times
- Contact:
Re: [GROUP BUY] Carbide carving bits
Hi mateGumnuts wrote:Jamie
I recently bought a simialr looking set at Bunn....s . They were cheap but seemed to clog up with wood very quickly.
How do these ones perform?????
Thanks

these bits are similar to a rasp, I havent noticed any real clogging as from what I have seen they are pretty close to self de clogging, un like the dremel type bits that clog up and you need to clean them.
so no they dont clog any, not from my experience with them, I have used them at low medium and fast speeds and they all have there uses, high speed will remove wood quickly, low speed is great for detail work as they put in natural looking lines

Also I am quite happy to order more than 1 per person, to be honest you can order 5-10-15 how ever many you like

Jamie

SHOHIN YAKUZA!!!
taking the top half of trees of since 2005! 
and growing trees for the future generations! 50+ year plans


and growing trees for the future generations! 50+ year plans

- Bretts
- Bonsai Philosopher
- Posts: 6671
- Joined: November 14th, 2008, 11:04 pm
- Favorite Species: carpinus jbp
- Bonsai Age: 12
- Location: Jervis Bay NSW
- Has thanked: 1 time
- Contact:
Re: [GROUP BUY] Carbide carving bits
At around $15 I will give a set a try. Thanks!
It's too bad your in such a hurry cause the stories I could tell you, Bushels and baskets of stories, hole crates full of stories. But if you can spare a moment I will tell you one story.
- Gumnuts
- Aussie Bonsai Fan
- Posts: 57
- Joined: January 21st, 2009, 7:22 am
- Favorite Species: Ficus/elm/maple
- Bonsai Age: 10
- Bonsai Club: none
- Location: Sydney (Dural)
Re: [GROUP BUY] Carbide carving bits
Jamie
I will have a set too!
Cheers
I will have a set too!
Cheers
Good planets are hard to find.
- tex048
- Aussie Bonsai Fan
- Posts: 258
- Joined: January 6th, 2010, 8:04 am
- Favorite Species: Various Figs, Australian Natives
- Bonsai Age: 11
- Bonsai Club: Illawarra
- Location: Sutherland, Sydney
Re: [GROUP BUY] Carbide carving bits
Hi Jamie
Thanks for the info and this new thread.
Put me down for x2 sets.
Many thanks
Thanks for the info and this new thread.
Put me down for x2 sets.
Many thanks
- Jamie
- Bonsai passionardo
- Posts: 6829
- Joined: August 21st, 2009, 8:08 pm
- Favorite Species: CLERO!!!,ficus, celtis, juniper, elms
- Bonsai Age: 9
- Bonsai Club: AUSBONSAI.COM
- Location: queensland, Hervey Bay
- Been thanked: 2 times
- Contact:
Re: [GROUP BUY] Carbide carving bits
Hi guys 
there has definately been enough interest with this to go through, I have contacted my supplier and am awaiting a price per set. hopefully get that by tomorrow night
jamie

there has definately been enough interest with this to go through, I have contacted my supplier and am awaiting a price per set. hopefully get that by tomorrow night

jamie

SHOHIN YAKUZA!!!
taking the top half of trees of since 2005! 
and growing trees for the future generations! 50+ year plans


and growing trees for the future generations! 50+ year plans

- bonsai4life
- Aussie Bonsai Fan
- Posts: 120
- Joined: June 29th, 2009, 10:29 pm
- Favorite Species: natives
- Bonsai Age: 3
- Bonsai Club: AusBonsai
- Location: brisbane
Re: [GROUP BUY] Carbide carving bits
Hi Jamie I will definately take a set..
thanks for the oppurtunity mate
thanks for the oppurtunity mate
Why is it that some people can't just give there oppinion.....if someone does not agree is there really a need to jump on your shetland pony and pretend its a high horse???
- Jamie
- Bonsai passionardo
- Posts: 6829
- Joined: August 21st, 2009, 8:08 pm
- Favorite Species: CLERO!!!,ficus, celtis, juniper, elms
- Bonsai Age: 9
- Bonsai Club: AUSBONSAI.COM
- Location: queensland, Hervey Bay
- Been thanked: 2 times
- Contact:
Re: [GROUP BUY] Carbide carving bits
bump 
hi guys, we have a few orders now, Im just bringing the post up again for some members that havent seen the offer.
thanks guys

hi guys, we have a few orders now, Im just bringing the post up again for some members that havent seen the offer.
thanks guys

SHOHIN YAKUZA!!!
taking the top half of trees of since 2005! 
and growing trees for the future generations! 50+ year plans


and growing trees for the future generations! 50+ year plans

- Chris Di Nola
- Aussie Bonsai Fan
- Posts: 352
- Joined: March 16th, 2009, 6:54 pm
- Favorite Species: Junipers
- Bonsai Age: 18
- Bonsai Club: Illlawarra
- Location: Sydney
- Been thanked: 1 time
- Contact:
- cactuscandy2004
- Aussie Bonsai Fan
- Posts: 33
- Joined: December 26th, 2008, 4:43 pm
- Jamie
- Bonsai passionardo
- Posts: 6829
- Joined: August 21st, 2009, 8:08 pm
- Favorite Species: CLERO!!!,ficus, celtis, juniper, elms
- Bonsai Age: 9
- Bonsai Club: AUSBONSAI.COM
- Location: queensland, Hervey Bay
- Been thanked: 2 times
- Contact:
Re: [GROUP BUY] Carbide carving bits
no probs guys 
I will be putting the order in around a week or two, giving everyone enough time to think about it and get there orders in
once sorted out I will give bank details in this thread where everyone can put the payment in.
jamie

I will be putting the order in around a week or two, giving everyone enough time to think about it and get there orders in

jamie

SHOHIN YAKUZA!!!
taking the top half of trees of since 2005! 
and growing trees for the future generations! 50+ year plans


and growing trees for the future generations! 50+ year plans
