Page 1 of 2

Help with Juni PLEASE

Posted: April 28th, 2015, 9:25 am
by Damian79
Hi Guys
One of my Junis has started turning brown. This started on the bottom branch and is slowly working its way up. I have already removed two of the bottom branches as the turned brown and died. I tried everything I can think of. Sprayed for pests, moved to a sunnier part of the yard changed the soil and checked the roots nothing seem to be helping.
What do I do???
Cheers in advance
20150426_165048.jpg

Re: Help with Juni PLEASE

Posted: April 28th, 2015, 10:13 am
by JaseH
Might be seiridium canker - or cypress canker. I have been told to try a copper fungicide but I think its more a preventative than a cure. :(

Re: Help with Juni PLEASE

Posted: April 28th, 2015, 11:36 am
by Pup
Is any of the new growth distorted, if so it could be PHOMA treat with a copper based fungicide. All over the plant and soil.

Cheers Pup

Re: Help with Juni PLEASE

Posted: April 28th, 2015, 12:11 pm
by treeman
I do recommend the copper spray but remember that the affected branch is lost.

Re: Help with Juni PLEASE

Posted: April 28th, 2015, 12:23 pm
by stocaz
I had the same problem...
viewtopic.php?f=7&t=18609&start=30
took me a while to figure out but got there :)
I had to hit it with copper spray religiously for a few months before i got on top of it and now the tree is fine. Did loose a few branches before that.
Get onto it asap.

Ross

Re: Help with Juni PLEASE

Posted: April 28th, 2015, 12:24 pm
by stocaz
You can def kiss that affected branch goodbye :cry:

Re: Help with Juni PLEASE

Posted: April 28th, 2015, 12:32 pm
by Scooter_M
Did you try and bend the branch too far? i had a similar effect but it was pretty obvious that i bent it too far and just broke the branch.. just died off after that.

Re: Help with Juni PLEASE

Posted: April 28th, 2015, 12:35 pm
by Damian79
stocaz wrote:I had the same problem...
viewtopic.php?f=7&t=18609&start=30
took me a while to figure out but got there :)
I had to hit it with copper spray religiously for a few months before i got on top of it and now the tree is fine. Did loose a few branches before that.
Get onto it asap.
Thanks Stocaz. Did you jin the branch or just lob it off. If its gotta go Id like to at least keep it as a jin>
Scooter_M wrote:Did you try and bend the branch too far? i had a similar effect but it was pretty obvious that i bent it too far and just broke the branch.. just died off after that.
Nah Didn't bend this one too far. Was going fine then the lower branches just died off and it seems to be traveling up the tree.

Re: Help with Juni PLEASE

Posted: April 28th, 2015, 12:57 pm
by stocaz
Yeah jin all the way, as it was a large branch at least i got something good out of it :)

Re: Help with Juni PLEASE

Posted: April 30th, 2015, 3:03 pm
by Damian79
Hi guys
the only copper sulphate I could find is the Yates bluestone powered stuff?
The directions say not to apply directly to foliage?
Have you heard of this type before?
Cheers

Re: Help with Juni PLEASE

Posted: May 1st, 2015, 7:17 am
by Reece
Damian79 wrote:Hi guys
the only copper sulphate I could find is the Yates bluestone powered stuff?
The directions say not to apply directly to foliage?
Have you heard of this type before?
Cheers

Yeah that's a good question. I think I have a similar problem. What "copper spray" does everyone use?

Re: Help with Juni PLEASE

Posted: May 1st, 2015, 8:08 am
by PeterH
Kocide Blue Xtra by Multicrop

Re: Help with Juni PLEASE

Posted: May 1st, 2015, 8:10 am
by JaseH
Yates Liquid Copper should be easy to get.

Re: Help with Juni PLEASE

Posted: May 1st, 2015, 8:16 am
by Reece
Ok so contrary to what the label says on the Yates one it fine to spray this on foliage regularly?

Its all copper sulphate at the end of the day hey?

Re: Help with Juni PLEASE

Posted: May 1st, 2015, 8:28 am
by stocaz
Damian79 wrote:Hi guys
the only copper sulphate I could find is the Yates bluestone powered stuff?
The directions say not to apply directly to foliage?
Have you heard of this type before?
Cheers
I used the yates liquid copper