Page 1 of 3
Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 7:57 pm
by bingh
I note that there is quite a bit of interest in cleros on the forum so if you are happy about it I'd like to share a bit of my experience with you. This clero was grown from a matchstick sized cutting and grown in the ground for some years, cut back several times a year and grown on. As you will see from the first pic it had a horrible reverse taper and no root on the right side. At an AABC show some yrs ago Master Chiang from Taiwan did a root graft on a fig.
I decided to give it a go - will include a series of photos. When you want me to stop let me know. The first pic shows reverse taper
Brian
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 7:58 pm
by bingh
Next pic shows where
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:04 pm
by bingh
Sorry about pic quality.
Master Chiang's technique was to do a sort of mortice and tenon by carving a channel in the trunk and trimming the smaller tree so it would fit into the channel. Unlike his, I left a shoot at the top of the scion so it would be guaranteed to keep growing.
More to follow if you want
Brian
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:09 pm
by Jamie
absolutely brian! your knowledge and information will be greatly appreciated here mate!
i have a couple of clero myself, they were just trunks a few weeks ago, now they have exploded with growth, i am wondering how long it takes for the shoots to harden off and secondary branching to be formed? they seem to be such vigourous growers i dont see it being to long?
cheers
jamie

Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:12 pm
by bingh
Jamie
It will take only a week or two at this time of year before you can wire and cut them back
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:15 pm
by Jarrod
That has made all the difference. That's a wonderful use ofte method.
Oh and the tree ain't bad either. How long were you ground growing this for?
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:15 pm
by Jamie
thanks mate
and nice clero to by the way, it looks big, could you give us some dimensions if possible?
cheers
jamie

Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:21 pm
by bingh
Jarrod
More to come. From memory it was in the ground for about 4 years.
Jamie
I just had to go outside to measure it - the things I do for you guys. It's about 35cm high
Brian
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:24 pm
by Jamie
Jamie
I just had to go outside to measure it - the things I do for you guys. It's about 35cm high
sorry mate
thank you

its a bit decieving in the pics, its got a solid trunk to it and some nice flow for a tree that size, with a trunk of that width.
i like it alot mate
jamie

Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:32 pm
by bingh
This the first before and after view. The one on the left is the after pic
Brian
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:36 pm
by bingh
This is just after the procedure. Note that the bark on the scion is much finer than the trunk bark. That is because it is a much younger tree and has not been growing so vigorously. Note also the shoot at the top of the scion
Brian
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 8:54 pm
by bingh
Graft taken. Note the 2 sacrifice branches from the top of the scion. They were left to make it grow more vigorously thus helping the graft to take
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 10:03 pm
by bingh
Closeup - graft worked. Note also those sacrifice branches
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 10:06 pm
by bingh
Finally - hope I haven't bored you too much and that this can help others with other species
Brian
Re: Clerodendrum - fixing a nasty reverse taper
Posted: February 2nd, 2010, 10:08 pm
by Jamie
excellent pictorial brian
you can hardly see any joint line, if you can at all, and that is only gonna be less and less noticable as time goes on with the way clero bark is. great work
jamie
