Thread grafting
-
- Aussie Bonsai Fan
- Posts: 200
- Joined: October 30th, 2011, 11:08 pm
- Favorite Species: Ficus, Juniper
- Bonsai Age: 0
- Bonsai Club: Bonsai Workshop Inc.
- Location: Perth, WA
- Contact:
Thread grafting
Hi all,
I have a recalcitrant large olive stump that refuses to back bud in the areas I want it to. I have a number of shoots that could be used to thread graft but I am unsure when the right season is?
cheers
Adrian
I have a recalcitrant large olive stump that refuses to back bud in the areas I want it to. I have a number of shoots that could be used to thread graft but I am unsure when the right season is?
cheers
Adrian
- MoGanic
- Aussie Bonsai Fan
- Posts: 1250
- Joined: May 3rd, 2012, 7:15 pm
- Favorite Species: Shimpaku
- Bonsai Age: 0
- Location: Victoria
Re: Thread grafting
Defoliate any foliage towards the end of winter/start of spring as the terminal buds begin to swell (not too much because you want to fit it through the hole). Then feeeeeeeeeeeeeed for some serious growth. Once the exit side of the branch is 3 times or more the thickness of the entry side of the branch, you're good to go
. Thread grafts can be done pretty much any time but you want to do it during the most active period for quicker growth hence, quicker graft. Olives can grow very well sort of early to mid spring if treated well
. Just ask Olive Crazy =D


There are many ways to do things, but only one "best" way.
- thoglette
- Aussie Bonsai Fan
- Posts: 499
- Joined: October 8th, 2009, 11:09 pm
- Favorite Species: Acer Palmatum
- Bonsai Age: 10
- Bonsai Club: The Bonsai Workshop
- Location: A cloud of disconnected thoughts
- Has thanked: 42 times
- Been thanked: 26 times
- Contact:
Re: Thread grafting
+1. Avoid damaging the bud at the end of the thread. Rather drill a too-large hole than a too-small hole.
-
- Aussie Bonsai Fan
- Posts: 200
- Joined: October 30th, 2011, 11:08 pm
- Favorite Species: Ficus, Juniper
- Bonsai Age: 0
- Bonsai Club: Bonsai Workshop Inc.
- Location: Perth, WA
- Contact:
Re: Thread grafting
Hi guys, thanks for the reply. I'll wait and see what happens. it might decide to bud back.
- MoGanic
- Aussie Bonsai Fan
- Posts: 1250
- Joined: May 3rd, 2012, 7:15 pm
- Favorite Species: Shimpaku
- Bonsai Age: 0
- Location: Victoria
Re: Thread grafting
Give it lots of sun on that side - olives will bud towards the sun heavily.ADO wrote:Hi guys, thanks for the reply. I'll wait and see what happens. it might decide to bud back.
There are many ways to do things, but only one "best" way.
-
- Aussie Bonsai Fan
- Posts: 926
- Joined: December 17th, 2009, 1:31 pm
- Favorite Species: Olive, ficus, azalea
- Bonsai Age: 36
- Location: Fraser Coast Queensland
- Been thanked: 4 times
Re: Thread grafting
Good luck with the graft Adrian. I have attempted around 8 to 12 thread grafts on Olives so far and none have taken. Grafted branches have all grown gangbusters, right up to the time I cut them off, couple days later = dead branch. I know Olives can be grafted, as a lot of the commercial Olives in SA were being grafted onto the SA wild Olive root stock. Damned if I can work out why the thread grafts aren't taking.
Graeme
I will forever defend your right
to disagree with my opinion.
I will forever defend your right
to disagree with my opinion.
- MoGanic
- Aussie Bonsai Fan
- Posts: 1250
- Joined: May 3rd, 2012, 7:15 pm
- Favorite Species: Shimpaku
- Bonsai Age: 0
- Location: Victoria
Re: Thread grafting
Apparently, for an olive, it would take around 2-3 years.Graeme wrote:Good luck with the graft Adrian. I have attempted around 8 to 12 thread grafts on Olives so far and none have taken. Grafted branches have all grown gangbusters, right up to the time I cut them off, couple days later = dead branch. I know Olives can be grafted, as a lot of the commercial Olives in SA were being grafted onto the SA wild Olive root stock. Damned if I can work out why the thread grafts aren't taking.
There are many ways to do things, but only one "best" way.
- bonzaidog
- Aussie Bonsai Fan
- Posts: 296
- Joined: December 31st, 2009, 6:31 pm
- Favorite Species: ficus,olives,bougies
- Bonsai Age: 6
- Bonsai Club: The Bonsai Workshop Inc, Bonsai Society of WA
- Location: perth
Re: Thread grafting
Addz...You might get lucky with lots of sun , feeding AND pruning the tops back to force it to pop buds lower down, also a subtle rethink on selecting a front and/or potting angle can do the trick. never discount a sneaky bit of wiring to position a branch from elsewhere to fill areas.
....Dog

-
- Aussie Bonsai Fan
- Posts: 200
- Joined: October 30th, 2011, 11:08 pm
- Favorite Species: Ficus, Juniper
- Bonsai Age: 0
- Bonsai Club: Bonsai Workshop Inc.
- Location: Perth, WA
- Contact:
Re: Thread grafting
hi mate, good advice. ive got DL in there and its in full sun. might prune a little bit to force growth. i just need some more branches toward the apex.
catch ya next meeting!
take care
ADZ
catch ya next meeting!
take care
ADZ
- bonzaidog
- Aussie Bonsai Fan
- Posts: 296
- Joined: December 31st, 2009, 6:31 pm
- Favorite Species: ficus,olives,bougies
- Bonsai Age: 6
- Bonsai Club: The Bonsai Workshop Inc, Bonsai Society of WA
- Location: perth
Re: Thread grafting
You'll probably notice a bit more growth happening now the peak of summer has gone,I find they slow off a bit in the really hot part of the year...and I don't blame em!
....Dog.

-
- Aussie Bonsai Fan
- Posts: 200
- Joined: October 30th, 2011, 11:08 pm
- Favorite Species: Ficus, Juniper
- Bonsai Age: 0
- Bonsai Club: Bonsai Workshop Inc.
- Location: Perth, WA
- Contact:
Re: Thread grafting
I didn't know that! Probably explains why have slowed down too
I gave the olive a good prune which it probably needed anyway. hopefully this will induce budding
take it easy
Adrian

I gave the olive a good prune which it probably needed anyway. hopefully this will induce budding
take it easy
Adrian
- Grant Bowie
- Aussie Bonsai Fan
- Posts: 3810
- Joined: February 18th, 2009, 3:22 pm
- Favorite Species: Banksia
- Bonsai Age: 52
- Bonsai Club: Canberra
- Location: Canberra
- Been thanked: 351 times
Re: Thread grafting
Yes,
The Olives at the collection are also putting on growth now after a slow summer.
Grant
The Olives at the collection are also putting on growth now after a slow summer.
Grant
-
- Aussie Bonsai Fan
- Posts: 1404
- Joined: June 24th, 2010, 6:23 pm
- Favorite Species: The ones that don't die
- Bonsai Age: 15
- Bonsai Club: Oyama Bonsai Kai, Ausbonsai
- Location: Cape Town, South Africa
- Been thanked: 2 times
Re: Thread grafting
How about this? If you've done a graft and are worried about it having taken, then ring-bark the source branch in small sections bit by bit. This has the effect of slowly reducing the sap flow from the source branch and transferring it to the graft point. If the graft has not taken, then in theory you will start to get wilting of the graft branch when the ring barking reaches a point of little sap flow. If this happens, you can stop the ring-barking and hopefully save the branch for another period of time. Should work - never tried it though. I recently cut the source from a thread graft on an elm here, and the graft died back. Thinking back, I should have done it like this instead. I cut it a bit early as the blasted tree sent out a nice new shoot exactly where I needed it. (I had the graft slightly wrong)
-
- Aussie Bonsai Fan
- Posts: 7935
- Joined: August 22nd, 2009, 8:41 pm
- Favorite Species: trident maple
- Bonsai Age: 41
- Bonsai Club: Albury/Wodonga; BSV; Canberra; VNBC
- Location: Yackandandah
- Has thanked: 81 times
- Been thanked: 1628 times
- Contact:
Re: Thread grafting
Andrew, that is how I have been dealing with my juniper approach grafts. Have had some die after cutting the source trunk so now, when I'm reasonably confident the graft has started to unite, debark about half of the source trunk and leave for a few months. I figure if any connection exists the tree will put more effort into it if it feels the original source is compromised. Maybe debark a but more then and leave for longer but if it looks well healed just cut it off at that stage.
http://shibuibonsai.com.au/" onclick="window.open(this.href);return false;